(with and without KITO® flame arrester) Warm-water / steam heating, as frost protection or to maintain temperatures in the armature housings. Maximum temperature of the heating medium: KITO®-flame arresters : Max. 25 K above the permissible operating temperature, but no more than 80% the ignition temperature other KITO®-armatures : • For flammable products max. 80% …
(with and without KITO® flame arrester) Warm-water / steam heating, as frost protection or to maintain temperatures in the armature housings. Maximum temperature of the heating medium: KITO®-flame arresters : Max. 25 K above the permissible operating temperature, but no more than 80% the ignition temperature other KITO®-armatures : • For flammable products max. 80% …
L 2 N Heating jackets for KITO®-End-of-line armatures Read More »
(with and without KITO® flame arrester) Frost protection or heating for constant temperature in the valve casings for ambient temperatures down to -20 °C. Heater cables of temperature classes T4 and T6 are used depending on the product to be heated. A constant heating is only permitted up to ambient temperatures ≤ +20 °C. An …
(with and without KITO® flame arrester) HORST®-Heating sleeves can be used on valve housings and serve as frost protection heating or for temperature maintenance for ambient temperatures of -40 °C to +85 °C.
(End-of-line and inline armatures with and without KITO® flame arrester) If an indication is desired or required (e. g. VdTÜV-guideline 967, §9.2.2.2), if the valve disk is in the position „closed“ or if a signal should be given if the valve opens.
(Resistance thermometer) For monitoring the temperature on the flame arrester element on the unprotected side (side of ignition source), mainly where a flow of flammable mixture is present for longer time. This could be e.g. in pipes to flares, ovens, fans, recuperation or thermal recovery units. In case of a temperature rise a stabilized burn …
KITO® SK/K-IIA-… Fittings for screwing in armature housings of endurance-burn proof pressure valves and combined PV valves for all inflammable liquids and vapors of explosion group IIA with MESG > 0.9 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and prevents flames from entering the valves
KITO® SK/K-IIB1-… Fittings for screwing in armature housings of endurance-burn proof pressure valves and combined PV valves for all inflammable liquids and vapors of explosion group IIB1 with MESG ≥ 0.85 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and prevents flames from entering the valves.
KITO® KA-IIB3-1/2” Fittings for screwing in armature housings of deflagration-proof pressure relief valves and combined PV valves for all inflammable liquids and vapors of explosion group IIB3 with NSW >= 0.65 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and prevents flames from entering the valves
KITO® KA-DB-IIB-1/2” Fittings for screwing in armature housings of endurance-burn proof pressure valves and combined PV valves for all inflammable liquids and vapors of explosion group IIB with NSW >= 0.5 mm. The condensate drain device enables draining of the condensate inside the housing to the outside and prevents flames from entering the valves
